C1A10 - Pre-Collision System
DTC C1A10 Front Radar SensorDESCRIPTION
DTC Detection Condition:
The driving support ECU uses the front millimeter wave radar sensor to detect obstacles in front of the vehicle. Based on this information, the driving support ECU sends pre-collision control operation signals. When the driving support ECU receives information that there is a malfunction in the front millimeter wave radar sensor, DTC C1A10 is output.
This DTC is also output from the dynamic radar cruise control system.
Step 1-3:
INSPECTION PROCEDURE
NOTE: When the front millimeter wave radar sensor is replaced with a new one, adjustment of the front sensor beam axis must be performed.