C13A7

DTC C13A7/43 Actuator Malfunction

DESCRIPTION

WIRING DIAGRAM:

INSPECTION PROCEDURE

NOTICE:
^ If the electric parking brake ECU or electric parking brake actuator is replaced, perform the "RESET MEMORY" and "ACQUIRE TENSION SENSOR ZERO POINT" procedures.
^ Before disconnecting connectors or fuses, turn the engine switch off and wait 20 seconds or more.
^ This DTC may be output if a manual release cable is used. There is no malfunction. Perform the "RESET MEMORY" and "ACQUIRE TENSION SENSOR ZERO POINT" procedures.

Step 1:

Step 1 Continued, Step 2-4:

Step 4 Continued: