B2288

DTC B2288 Steering Lock Signal Circuit Malfunction

DESCRIPTION

DTC Detection Condition:

This DTC is output when the power source control ECU cannot detect the unlock condition of the steering lock within a specified time.

HINT: When the power source control ECU is replaced with a new one and the negative (-) battery terminal is connected, the power source mode becomes the IG-ON mode. When the battery is removed and reinstalled, the power source mode that was selected when the battery was removed is restored.

Wiring Diagram:

Step 1:

Step 1 (Continued)-3:

Step 4-5:

Step 5 (Continued)-6:

Step 6 (Continued)-7:

INSPECTION PROCEDURE