Electronically Controlled Brake System
DIAGNOSTIC TROUBLE CODE CHARTHINT:
- If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code.
- Inspect the fuse and relay before investigating the trouble areas as shown in the table given.
C0200/31-C1235/35:
C1236/36-U0124/95:
DTC chart of ABS:
1. Drive the vehicle at the speed of 50 km/h (31 mph) and depress the brake pedal strongly for approximately 3 seconds.
2. Repeat the given operation 3 times or more and check that the ABS warning light goes off.
3. Clear the DTC.
HINT:
- In some cases, the intelligent tester cannot be used when the ABS warning light remains on.
- When U0073/94, U0100/65, U0123/62, U0124/95, 110126/ 63, U0130/68 or U0131/67 is output, inspect and repair the trouble areas indicated by these codes first.
C1201/51-U0131/67:
DTC chart of VSC:
C1202/68-C1311/11:
C1312/12-C1354/25:
C1355/27-C1377/43:
C1378/44-C1392/48:
DTC chart of Electronically Controlled Brake System:
C1271/71-C1281/81:
Test mode DTC of ABS:
C0371/71:
Test mode DTC of VSC:
C1346/71:
Test mode DTC of Electronically Controlled Brake System: