B1851

DTC B1851/62 Open in Rear Side Squib RH Circuit

DESCRIPTION

DTC Detecting Condition:

The rear side squib RH circuit consists of the center airbag sensor assembly and the rear seat airbag assembly RH.

This circuit instructs the SRS to deploy when deployment conditions are met.

These DTCs are recorded when a malfunction is detected in the rear side squib RH circuit.

Wiring Diagram:

INSPECTION PROCEDURE

HINT:
- Perform the simulation method by selecting the "check mode" (signal check) with the intelligent tester.
- After selecting the "check mode" (signal check), perform the simulation method by wiggling each connector of the airbag system or driving the vehicle on a city or rough road.

Step 1:

Step 2:

Step 2 (Continued)-3: