Dynamic Radar Cruise Control System

DTC P0571 Brake Switch "A" Circuit

DESCRIPTION

DTC Detection Condition:

When the brake pedals is depressed, the stop light switch sends a signal to the ECM. When the ECM receives this signal, it cancels the cruise control. The fail-safe function operates to enable normal driving even if there is a malfunction in the stop light signal circuit. The cancellation condition occurs when voltage is applied to terminal STP. When the brake is applied, voltage is normally applied to terminal STP of the ECM through the STOP SW fuse and the stop light switch, and the ECM turns the cruise control off.

Wiring Diagram:

Step 1-3:

Step 3 (Continued)-4:

INSPECTION PROCEDURE