B2611

DTC B2611 Telescopic Position Sensor or Telescopic Motor Circuit Malfunction

DESCRIPTION
The telescopic motor is operated by the power source voltage supplied from the multiplex tilt & telescopic ECU and makes the steering column slide forward and backward. The telescopic position sensor (Hole IC) in the telescopic motor detects the sliding position in the forward and backward directions of the steering column and outputs a signal to the CPU based on that sliding amount.





HINT:
Limit positions can be confirmed on the screen of the intelligent tester.

B2611:

WIRING DIAGRAM:

INSPECTION PROCEDURE

HINT:
The wire harness between the multiplex tilt & telescopic ECU and telescopic motor is provided with the steering column assembly.

Step 1:

Steps 2-3:

Steps 4-5:

Step 6: