U0100

DTC U0100/65 LOST COMMUNICATION WITH ECM / PCM

CIRCUIT DESCRIPTION

DTC Detection Condition:

The translate ECU inputs the signals from the ECM via the CAN communication system.


HINT: For CAN communication malfunctions, after the malfunction is determined using the translate ECU, the results are sent to the skid control ECU. In total, this takes 7 seconds.

Step 1:

Step 1:

INSPECTION PROCEDURE

HINT: This circuit uses the CAN communication. Therefore, if there are any malfunctions in the communication circuit, one or more DTCs in the CAN communication system will be output.