Symptom Related Diagnostic Procedures
PROBLEM SYMPTOMS TABLEProblem Symptoms Table (Part 1):
Problem Symptoms Table (Part 2):
Problem Symptoms Table (Part 3):
Problem Symptoms Table (Part 4):
Problem Symptoms Table (Part 5):
If a normal system code is displayed during the DTC check but the problem still occurs, check the circuits for each problem symptom in the order given in the table and proceed to the relevant troubleshooting.
HINT: Inspect the fuse and relay before confirming the suspected area in the given table.
Inspect each malfunction circuit in numerical order for the corresponding symptom.
If the malfunction still exists even after checking and confirming that all the circuits are normal, replace the ECU.