Steering Lock System

DIAGNOSTIC TROUBLE CODE CHART

B2775-B2799:

If a trouble code is displayed during the DTC check, check the circuit listed for that code in the table and proceed to the appropriate Troubleshooting.

HINT:
- DTCs B2793, B2794, B2795, B2796, B2797 and/or B2798 are detected for troubles found when the smart key is inserted into the starter switch.
- DTCs B2793, B2794, B2795, B2796, B2797 and/or B2798 indicate troubles in the steering lock ECU and the transponder key ECU, and the same troubleshooting method is applied to both ECUs. Therefore, if these DTCs are detected, refer to the immobilizer section to conduct troubleshooting.