P2716

DTC P2716 Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT)

DESCRIPTION
Refer to DTC P2714. P2714

DTC Detection Condition:

Reference (Using an oscilloscope):
Check the waveform between the terminals SLT+ and SLT- of the ECM connector





Standard: Refer to the illustration.





MONITOR DESCRIPTION
When an open or short in the linear solenoid valve (SLT) circuit is detected, the ECM interprets this as a fault. The ECM will turn on the MIL and store the DTC.

Monitor Strategy:

Typical Enabling Conditions:

Typical Malfunction Thresholds:

Component Operating Range:

Wiring Diagram:

INSPECTION PROCEDURE

Step 1:

Step 2:

Step 3: