P2716

DTC P2716 Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT)

DESCRIPTION
Shifting from 1st to 6th is performed in combination with "ON" and "OFF" operation of the shift solenoid valves SL1, SL2, S1, S2, S3, S4 and SR which is controlled by the ECM. If an open or short circuit occurs in either of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valve to allow the vehicle to be operated smoothly (In case of an open or short circuit, the ECM stops sending current to the circuit.)

DTC DETECTION CONDITION:

MONITOR DESCRIPTION

When an open or short in the linear solenoid valve (SLT) circuit is detected, the ECM interprets this as a fault. The ECM will turn on the MIL and store the DTC.

MONITOR STRATEGY:

TYPICAL ENABLING CONDITIONS:

TYPICAL MALFUNCTION THRESHOLDS:

COMPONENT OPERATING RANGE:

WIRING DIAGRAM:

INSPECTION PROCEDURE

Step 1:

Steps 2-3:

Step 3 (Continued):