B2243

DTC B2243 Current Steering Angle Mid-point Unset

DESCRIPTION

DTC Detection Condition:

This DTC is output when one of the given occurs: 1) the initial learning operation is not completed; 2) after the initial learning operation is completed, power is cut due to the battery cable being disconnected and reconnected, etc.; or 3) a data blockage at the steering sensor or variable gear ratio steering system occurs.

HINT: Steering sensor data is received through the CAN line. When data blockage occurs, it is displayed on the multi-information display.

Step 1-3:

Step 3(Continued)-4:

INSPECTION PROCEDURE