B0116

DTC B0116 OPEN IN SIDE SQUIB (LH) CIRCUIT

CIRCUIT DESCRIPTION

DTC Detection Condition:

The side squib (LH) circuit consists of the airbag sensor center and the separate type front seatback LH. It causes the SRS to deploy when the SRS deployment conditions are satisfied.

DTC B0116 is recorded when an open is detected in the side squib (LH) circuit.

Wiring Diagram:

Step 1:

Step 2:

Step 3:

INSPECTION PROCEDURE

CAUTION: Be sure to perform the following procedures before troubleshooting to avoid unexpected airbag and seat belt pretensioner activation.

a. Turn the ignition switch OFF.
b. Disconnect the cable from the negative (-) battery terminal cable, and wait for at least 90 seconds.
c. Disconnect the connectors from the airbag sensor center.
d. Disconnect the connector from the horn button.
e. Disconnect the connector from the front passenger airbag.
f. Disconnect the connector from the front seat airbag LH.
g. Disconnect the connector from the front seat airbag RH.
h. Disconnect the connector from the front seat outer belt LH.
i. Disconnect the connector from the front seat outer belt RH.