Navigation System

DIAGNOSTIC TROUBLE CODE CHART





1. PHYSICAL ADDRESS: 110 MULTI DISPLAY

HINT:
- *1: Even if no failure is detected, it may be stored depending on the battery condition or voltage for starting an engine.
- *2: It is stored when 180 sec. has passed after the power supply connector is pulled out after engine start.
- *3: It may be stored when the engine key is turned again after engine start.
- *4: It may be stored when the engine key is turned 1 min. again after engine start.




a. Logical address: 01 (Communication control)




b. Logical address: 21 (Switch)




c. Logical address: 34 (Front passenger monitor)

2. PHYSICAL ADDRESS: 190 RADIO RECEIVER ASSEMBLY ASSEMBLY

HINT:
- *1: Even if no failure is detected, it may be stored depending on the battery condition or voltage starting an engine.
- *2: It is stored when 180 sec. has passed after the power supply connector is pulled out after start.
- *3: It may be stored when the engine key is turned 1 min. again after engine start.
- *4: It may be stored when the engine key is turned again after engine start.
- *5: When 210 sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.







a. Logical address: 01 (Communication control)




b. Logical address: 61 (Cassette switch)




c. Logical address: 60 (Radio receiver assembly)

3. PHYSICAL ADDRESS: 178 NAVIGATION ECU

HINT:
- *1: Even if no failure is detected, it may be stored depending on the battery condition or voltage for starting an engine.
- *2: When 210 sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.
- *3: It may be stored when the engine key is turned 1 min. again after engine start.
- *4: It may be stored when the engine key is turned again after engine start.




a. Logical address: 01 (Communication control)




b. Logical address: 58 (Navigation ECU)

4. PHYSICAL ADDRESS: 440 STEREO COMPONENT AMPLIFIER

HINT:
- *1: Even if no failure is detected, it may be stored depending on the battery condition or voltage for starting an engine.
- *2: It may be stored when the engine key is turned 1 min. again after engine start.
- *3: It may be stored when the engine key is turned again after engine start.
- *4: When 210 sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.







Logical address: 01 (Communication control)

5. PHYSICAL ADDRESS: 240 CD AUTO CHANGER

HINT:
- *1: Even if no failure is detected, it may be stored depending on the battery condition or voltage for starting an engine.
- *2: It may be stored when the engine key is turned 1 min. again after engine start.
- *3: It may be stored when the engine key is turned again after engine start.
- *4: It may be stored when the engine key is turned again after engine start.
- *5: When 210 sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.







a. Logical address: 01 (Communication control)




b. Logical address: 63 (CD auto changer)