Radio, Stereo, and Compact Disc

DIAGNOSTIC TROUBLE CODE CHART




1. PHYSICAL ADDRESS: 190 RADIO RECEIVER ASSY

HINT:
- *1: Even if no failure is detected, it may be stored depending on the battery condition or voltage for starting an engine.
- *2: It is stored when 180 sec. has passed after the power supply connector is pulled out after engine start.
- *3: It may be stored when the engine key is turned 1 min. after engine start.
- *4: It may be stored when the engine key is turned again after engine start.
- *5: When 210 sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.

DTC D6 - DC:

DTC DD - E3:

a. Logical address: 01 (Communication control)

DTC 5D:

b. Logical address: 61 (Cassette switch)

DTC 60 - 68:

c. Logical address: 63 (CD player)

2. STEREO COMPONENT AMPLIFIER ASSY (Physical address: 440)

HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting an engine.
- *2: This code may be stored when the engine key is turned again 1 min. after engine start.
- *3: This code may be stored when the engine key is turned again after engine start.
- *4: When 210 sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.

DTC D6 - E1:

DTC E2 - E3:

Logical address: 01 (Communication control)

3. NETWORK GATEWAY ECU (Physical address: 1C6)

HINT:
- *1: Even if no failure is detected, it may be stored depending on the battery condition or voltage for starting an engine.
- *2: It may be stored when the engine key is turned 1 min. again after engine start.
- *3: It may be stored when the engine key is turned again after engine start.

- When 210 sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.

DTC D6 - E3:

Logical address: 01 (Communication control)