Radio, Stereo, and Compact Disc

DIAGNOSTIC TROUBLE CODE CHART




1. PHYSICAL ADDRESS: 190 RADIO RECEIVER ASSY

HINT:
- *1: Even if no failure is detected, it may be stored depending on the battery condition or voltage for starting an engine.
- *2: It is stored when 180 seconds has passed after the power supply connector is pulled out after engine start.
- *3: It may be stored when the engine key is turned 1 minute after engine start.
- *4: It may be stored when the engine key is turned again after engine start.
- *5: When 210 seconds has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.

Part 1:

Part 2:

a. Logical address: 01 (Communication control)




b. Logical address: 61 (Cassette switch)




c. Logical address: 63 (CD player)

2. STEREO COMPONENT AMPLIFIER (Physical address: 440)

HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting an engine.
- *2: This code be stored when the engine key is turned again 1 minute after engine start.
- *3: This code may be stored when the engine key is turned again after engine start.
- *4: When 210 seconds has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.

Part 1:

Part 2:

Logical address: 01 (Communication control)

3. GATEWAY ECU (Physical address: 1C6)

HINT:
- *1: Even it no failure is detected, it may be stored depending on the battery condition or voltage for starting an engine.
- *2: It may be stored when the engine key is turned 1 minute again after engine start.
- *3: It may be stored when the engine key is turned again after engine start.
- When 210 seconds has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.




Logical address: 01 (Communication control)