Suspension Control ( Automatic - Electronic Level )

DIAGNOSTIC TROUBLE CODE CHART

C1715/15 - C1779/79:

HINT:
- Connect the LED (10 - 20 mA) and resistor (500 Ohms to 1 kOhm) in series between terminals TEM and CG of the DLC3
- Using SST 09843-18040, connect terminals Tc and CG of the DLC3.
- If any abnormality is not found when the parts are inspected, inspect the absorber control ECU.
- If a malfunction code is displayed during the DTC check, check the circuit listed for that code. For details of each code, refer to the respective "DTC No." under "Trouble Code Diagnostic Procedures".

C1782/82 - C1797/97:

DTC Of The Input Signal Check