Blower Motor: Service and Repair

BLOWER MOTOR REMOVAL





1. REMOVE THESE PARTS:
(a) No. 2 under cover
(b) Glove compartment assembly
2. REMOVE ECU COVER
(a) Lift up the front end of the carpet on the passenger side.
(b) Remove the 2 nuts and the cover.





3. REMOVE CONNECTOR BRACKET
Remove the 2 screws and the bracket.





4. REMOVE MOTOR
(a) Disconnect the connector.
(b) Remove the 3 screws and the motor.

BLOWER MOTOR INSTALLATION
Installation is in the reverse order of removal.