P0773

CIRCUIT DESCRIPTION
The amount of current flow to the solenoid is controlled by the (*) duty ratio of the ECM output signal. The higher the duty ratio becomes, the higher the lock-up hydraulic pressure becomes during the lock-up operation.





(*) Duty Ratio
The duty ratio is the ratio of the period of continuity in one cycle. For example, if A is the period of continuity in one cycle, and 8 is the period of non-continuity, then

(*)
A
Duty Ratio = ----- x 100 (%)
A+8





DETECTING CONDITION





WIRING DIAGRAM





INSPECTION PROCEDURE