Removal

REAR SUSPENSION: REAR TRAILING ARM: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.

1. REMOVE REAR WHEEL

2. SEPARATE REAR SPEED SENSOR (for AWD)

(a) Remove the bolt and separate the rear speed sensor from the rear trailing arm assembly.





3. REMOVE REAR TRAILING ARM ASSEMBLY

(a) Remove the 2 bolts and separate the No. 3 parking brake cable assembly from the rear trailing arm assembly.





(b) Using a jack and wooden block, jack up the rear No. 2 suspension arm assembly to replicate standard vehicle height conditions.





Text in Illustration





NOTICE:
Do not jack up the rear No. 2 suspension arm assembly too high as the vehicle may fall.

(c) Remove the 4 bolts, 2 washers and rear trailing arm assembly.





(d) Slowly lower the rear No. 2 suspension arm assembly.