Removal

2GR-FE EMISSION CONTROL: PURGE VALVE: REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER Removal

2. REMOVE ENGINE ROOM SIDE COVER LH Removal

3. REMOVE COOL AIR INTAKE DUCT SEAL Removal

4. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

5. REMOVE NO. 1 VACUUM SWITCHING VALVE

(a) Disconnect the No. 1 vacuum switching valve connector.





(b) Disconnect the wire harness clamp.

(c) Disconnect the 2 fuel vapor feed hoses from the No. 1 vacuum switching valve.

(d) Remove the bolt and No. 1 vacuum switching valve.