Disassembly

HEATING / AIR CONDITIONING: CONDENSER: DISASSEMBLY

1. REMOVE NO. 1 COOLER CONDENSER CUSHION

(a) Remove the 2 No. 1 cooler condenser cushions as shown in the illustration.





Text in Illustration





NOTICE:
* Due to the potential of damaging the bracket, do not hold or support the bracket by hand when removing the cooler drier cap.
* When storing the condenser, do not put the brackets facing down (toward the ground) because this may cause damage to the brackets.

2. REMOVE COOLER DRYER

(a) Using a 14 mm straight hexagon wrench, remove the cap from the modulator.





Text in Illustration





NOTICE:
* Due to the potential of damaging the bracket, do not hold or support the bracket by hand when removing the cooler drier cap.
* When storing the condenser, do not put the brackets facing down (toward the ground) because this may cause damage to the brackets.

(b) Using pliers, remove the cooler dryer.





Text in Illustration





NOTICE:
* Due to the potential of damaging the bracket, do not hold or support the bracket by hand when removing the cooler drier cap.
* When storing the condenser, do not put the brackets facing down (toward the ground) because this may cause damage to the brackets.