Removal

2GR-FE COOLING: THERMOSTAT: REMOVAL

1. REMOVE FRONT WHEEL RH

2. REMOVE NO. 1 ENGINE UNDER COVER

3. REMOVE FRONT FENDER LINER RH

4. REMOVE FRONT FENDER APRON SEAL RH Removal

5. REMOVE ENGINE ROOM SIDE COVER LH Removal

6. REMOVE ENGINE ROOM SIDE COVER Removal

7. REMOVE COOL AIR INTAKE DUCT SEAL Removal

8. DRAIN ENGINE COOLANT Service and Repair

9. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

10. REMOVE V-RIBBED BELT Removal

11. DISCONNECT NO. 2 RADIATOR HOSE

(a) Disconnect the No. 2 radiator hose from the water inlet.





12. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY Removal

13. REMOVE WATER INLET

(a) Remove the 2 nuts and water inlet.





14. REMOVE THERMOSTAT

(a) Remove the thermostat from the water inlet housing.

(b) Remove the gasket from the thermostat.