Installation

EXTERIOR PANELS / TRIM: REAR SPOILER: INSTALLATION

1. INSTALL CENTER STOP LIGHT ASSEMBLY Installation

2. INSTALL REAR NO. 1 SPOILER COVER Installation

3. INSTALL REAR SPOILER SUB-ASSEMBLY

(a) Install the 2 pins.

(b) Install a new clip.

(c) Engage the clip and 2 pins to install the rear spoiler sub-assembly.





(d) Install the 5 nuts.





Torque : 5.9 Nm (60 kgf-cm, 52 in-lbf)

(e) Install the 2 hole plugs.

(f) Connect each connector.

4. INSTALL UPPER BACK WINDOW PANEL TRIM Reassembly