P0715

P0715 - Input Speed Sensor Circuit







General Description
The input (turbine) speed sensor outputs pulse-signals according to the revolutions of the input shaft of the transmission. The TCM determines the input shaft speed by counting the frequency of the pulses. This value is mainly used to control the optimum fluid pressure during shifting.

DTC Description
The PCM/TCM sets this code if an output pulse-signal is not detected, from the input speed sensor, when the vehicle is running faster than 30 km/h(18.64MPH). The Fail-Safe function will be set by the TCM if this code is detected.

Detecting Condition





Wiring Schematic





Signal Waveform