Displaying & Reading Trouble Codes

NOTE: This is the only information provided by the manufacturer for reading diagnostic trouble codes for this system.


DIAGNOSIS WITH HI-SCAN

CHECK PROCEDURES

SRS DLC - The DLC is located underneath the driver side crash pad.:

1. Connect the Hi-scan DLC to the vehicle data link connector located underneath the dash panel.
2. Turn the ignition key to "ON" position and turn on Hi-scan.
3. Perform the SRS diagnosis according to the vehicle model configuration.
4. If a fault code is retrieved, then replace the component. Never attempt to repair the component.
5. If the Hi-scan finds that a component of the system is faulty, there is a possibility that the fault is not in the components but in SRS wiring or connector.