Condenser Fan Does Not Operate

Condenser Fan Does Not Operate (A/C Compressor Clutch Operates Normally)

Step 1: Check Condenser Fan Operation




1. Disconnect condenser fan connector.
2. Apply 12V to terminal (BLU/WHT) and ground terminal (BLK) and verify that condenser fan operates.
3. If condenser fan does not operate, replace condenser fan.
4. If condenser fan operates, go to Step 2.

Step 2: Measure Voltage At Condenser Fan




1. Disconnect condenser fan connector.
2. Run engine at idle.
3. Turn A/C and blower switches ON.
4. Measure voltage at following terminal wire of condenser fan connector.