Power Steering Pump - Installation

3.7L AND 4.7L





1. Install pulley on pump if removed Power Steering Pump Pulley - Installation.
2. Install 3 pump mounting bolts (1) and tighten to 28 Nm (21 ft. lbs.).
3. Install the drive belt,Serpentine Accessory Drive Belt - Installation.
4. Install the pressure hose on the pump and tighten the nut to 28 Nm (21 ft. lbs.).
5. Install the cooler return hose at the reservoir.
6. Add power steering fluid,Power Steering System Bleeding.