Power Steering Cooler - Installation

3.7L AND 4.7L










1. Position and install the power steering cooler (2) with hoses (1AND3) to the vehicle.
2. Snap cooler on the a/c condenser (2).










3. Reconnect the steering gear return line (3) from the gear to the cooler.
4. Reconnect the reservoir return hose (5) to the cooler.
5. Refill the power steering fluid and bleed the system,Power Steering System Bleeding.
6. Start engine and check for leaks.





7. Install the grille and the 6 grille push pins (1).
8. Install the hood weather-strip seal (2) at the radiator cowl.