I3 Check Harness -VE Continuity (Input Speed Sensor)

CHECK HARNESS -VE CONTINUITY (INPUT SPEED SENSOR)





1. Turn the ignition switch to the OFF position.
2. Disconnect the harness connector.
3. With EM007 and EM046 disconnected, measure the resistance between EM046/014 and EM007/026.
- Is the resistance less than 0.5 ohms?
Yes --> GO to [I4] I4 Check Input Speed Sensor Coil Continuity
No --> Inspect EM007 and EM046 for corrosion, bent / pushed back pins or locate and repair the harness Test the system for normal operation.