F5 Check For Short To B+

F5 CHECK FOR SHORT TO B+





1. Disconnect the harness connector.
2. Turn the ignition switch to the ON position.
3. With EM007 disconnected, measure the voltage between EM007/014 and EM007/023.
4. Repeat for EM007/042 and EM007/023.
- O V?
Yes --> GO to [F6] F6 Check Harness Short To Screen
No --> Inspect EM007 & EM046 for corrosion, bent / pushed back pins or locate & repair the harness Test the system for normal operation