C11 Check Internal Harness and Component Continuity (Solenoids)

C11 CHECK INTERNAL HARNESS AND COMPONENT CONTINUITY - SOLENOIDS





1. Turn the ignition switch to the OFF switch.
2. Disconnect the harness connector.
3. With EM007 disconnected, measure the resistance between the following, noting the relevant Diagnostic Trouble Code (DTC).
4. For P0702 or P0753 EM007/52 and EM007/030.
5. For P0702 or P0758 EM007/52 and EM007/033.
6. For P0702 or P0763 EM007/52 and EM007/032.
- Is the resistance 30 to 35 ohms?
Yes --> Reconnect EM007, GO to [C14] C14 End
No --> Disconnect EM046 and reconnect EM007, GO to [C12] C12 Internal Transmission Check