A6 Check Harness Digital Ground Continuity

A6 CHECK HARNESS DIGITAL GROUND CONTINUITY





1. Turn the ignition switch to the OFF switch.
2. Disconnect the harness connector.
3. With EM007, EM047, Fc083 and AC027 (kickdown switch) disconnected, measure the resistance between EM007/028 to EM047/ONE.
- Is the resistance less than 0.5 ohms?
Yes --> GO to [A7] A7 Check Switch L1
No --> Inspect EM007, EM047, Fc083 and AC027 for corrosion, bent/pushed back pins or locate and repair the harness/splice EMS25. Test the system for normal operation.