Right-Hand

Removal
1. Raise the vehicle on a four-post ramp.





2. Slacken the rear to intermediate muffler securing clamp.





3. Remove the rear muffler and tailpipe assembly.
- Disengage the peg from the mounting rubber.
- Rotate the assembly back and forth to aid removal.
4. Clean the exhaust joints.


Installation





1. Install the rear muffler and tailpipe assembly.
- Connect the rear muffler to the intermediate muffler and insert to the Nominal indicator ring.
- Engage the peg with the mounting rubber.
- Check that the tailpipe position is within the specified settings, adjusting engagement within the Maximum and Minimum indicator rings if necessary; refer to Specifications. Specifications





2. Tighten the rear to intermediate muffler securing clamp.
3. Lower the ramp.