Body Control Module: Service and Repair

Removal
1. Switch ON the ignition. Move the passenger seat fully rearwards. Switch OFF the ignition. Whilst the door(s) is still open and the window down, disconnect the battery ground cable.







2. Disconnect the battery ground cable. Service and Repair
- Remove the battery cover.
3. Remove the glove box.







4. Remove the air ducting from the footwell.







5. Disconnect the harness from the module.
(1) Release the bolt which secures the harness multi-plug to the module.
2 Disconnect the harness multi-plug.







6. Remove the module.
(1) Remove the three nuts which secure the module to the fascia.
(2) Remove the module.

Installation
1. Installation is the reverse of removal.
2. Perform the Battery Reconnection Procedure.