Removal and Installation

COOLING FAN

Removal and Installation


REMOVAL

1.Remove reservoir tank. Refer to "Exploded View" Exploded View.
2.Remove air cleaner case (LH). Refer to "Exploded View" Exploded View.
3.Disconnect harness connector from cooling fan control module, and move harness to aside.
4.Remove engine under cover with power tool.
5.Remove cooling fan assembly from under the vehicle.

CAUTION:
Be careful not to damage or scratch on radiator core.

INSTALLATION

Note the following, and install in the reverse order of removal.

CAUTION:
Only use genuine parts for cooling fan mounting bolt and observe the specified torque (to prevent core support from being damaged).