Removal And Installation

FRONT WIPER ARM

Removal and Installation


REMOVAL

1.Operate the front wiper to move it to the auto stop position.
2.Open the hood.
3.Remove the front wiper arm cap.
4.Remove the front wiper arm mounting nut.
5.Raise front wiper arm, and remove front wiper arm from the vehicle.

INSTALLATION






1.Clean wiper arm mount as shown in the figure to prevent nuts from being loosened.
2.Operate the front wiper motor to move the front wiper to the auto stop position.
3.Adjust the front wiper blade position. Adjustments.
4.Install the front wiper arm by tightening the mounting nuts.
5.Inject the washer fluid.
6.Operate the front wiper to move it to the auto stop position.
7.Check that the front wiper blades stop at the specified position.
8.Install the front wiper arm caps.