Windshield Washer Spray Nozzle: Service and Repair

FRONT WASHER NOZZLE AND TUBE

Removal and Installation


REMOVAL

1.Fully open hood assembly.





2.Remove the front washer nozzle in numerical order as shown in the figure.





3.Remove seal rubber from front washer nozzle.

CAUTION:
Be careful not to damage seal rubber when removing
4.Disconnect front washer tube from front washer nozzle.

INSTALLATION

1.Connect the front washer tube into the front washer nozzle.
2.Install the seal rubber.
NOTE:
Apply adhesive on seal rubber before installation, if front washer nozzle has been removed.
3.Install the front washer nozzle to the hood.
NOTE:
The spray positions differ. Check that left and right nozzles are installed correctly.
4.Adjust the front washer nozzle spray position. Testing and Inspection.