Front Power Window Switch

FRONT POWER WINDOW SWITCH

Removal and Installation


REMOVAL

1.Remove the front door finisher.
Front Door Finisher.





2.Remove the armrest mounting screws (A), and then remove the armrest from the front door finisher.
3.Remove mounting screws (B) of power window main switch(1)
from the armrest.





4.Push out and remove power window main switch (1) from lower side, as shown in the figure.

INSTALLATION

Install in the reverse order of removal.
NOTE:
- If power window main switch or front power window switch (passenger side) is replaced or is removed, it is necessary to perform the initialization procedure.
- The same procedure is also performed for front power window switch (passenger side).