Removal And Installation

POWER SEAT SWITCH

Removal and Installation


REMOVAL


CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.Remove the front seat (driver side). Removal and Installation.
2.Remove the seat cushion outer finisher. Service and Repair.
3.Remove the screws.
4.Remove power seat switch from the seat cushion outer finisher.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
Be sure to clump the harness to the right place.
NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. Refer to
Description.