Removal And Installation

AIR CLEANER AND AIR DUCT

Removal and Installation


REMOVAL

NOTE:
Mass air flow sensor is removable under the car-mounted condition.
1.Remove Air duct (inlet).
2.Disconnect mass air flow sensor harness connector.
3.Disconnect PCV hose.
4.Remove air cleaner case & mass air flow sensor assembly and air duct by disconnecting their joints.
- Add marks if necessary for easier installation.
5.Remove mass air flow sensor from air cleaner case, if necessary.

CAUTION:
Handle mass air flow sensor according to the following instructions.
- Never shock the mass air flow sensor.
- Never disassemble the mass air flow sensor.
- Never touch the sensor of the mass air flow sensor.

INSTALLATION

Note the following, and install in the reverse order of removal.
- Align marks. Attach each joint. Screw clamps firmly.