Glass Mirror

OUTSIDE MIRROR

GLASS MIRROR : Removal and Installation


REMOVAL

1.Place the glass mirror upward.





2.Apply a strip of protective tape (B) on housing assembly.
3.As shown in the figure, insert a small flat-bladed screwdriver (A)
between glass mirror (1) and actuator (2). Push up both pawls simultaneously to remove glass mirror lower half side.
NOTE:
Insert flat-bladed screwdriver into recesses (3), and push up while rotating (twisting) to make work easier.

CAUTION:
Apply protective tape (B) around housing to protect the painted surface from damage.





4.Remove both terminals (A) of mirror heater attachment from door mirror (1).

INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:
After installation, visually check that pawls are securely engaged.