BSW & BSI

PRE-INSPECTION FOR DIAGNOSIS

Inspection Procedure


1. PERFORM PRE-INSPECTION OF LANE CAMERA UNIT

Perform pre-inspection of lane camera unit. LDW & LDP.
- GO TO 2.

2. CHECK REAR BUMPER NEAR THE SIDE RADAR

Are rear bumper near the side radar contaminated with foreign materials?
YES- Clean the rear bumper.
NO- GO TO 3.

3. CHECK SIDE RADAR AND THE SIDE RADAR OUTSKIRTS

Are side radar and the side radar outskirts contaminated with foreign materials?
YES- Clean the side radar or side radar outskirts.
NO- GO TO 4.

4. CHECK SIDE RADAR INSTALLATION CONDITION

Check side radar installation condition (installation position, properly tightened, a bent bracket).
Is it properly installed?
YES- INSPECTION END
NO- Install side radar properly.