Side Radar LH

POWER SUPPLY AND GROUND CIRCUIT

SIDE RADAR LH : Diagnosis Procedure


1. CHECK FUSES

Check if any of the following fuses are blown:





Is the inspection result normal?
YES- GO TO 2.
NO- Replace the blown fuse after repairing the affected circuit if a fuse is blown.

2. CHECK POWER SUPPLY CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect the side radar LH connector.
3.Check voltage between side radar LH harness connector and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- Repair the side radar LH power supply circuit.

3. CHECK GROUND CIRCUIT

Check continuity between side radar LH harness connectors and ground.





Is the inspection result normal?
YES- INSPECTION END
NO- Repair the side radar LH ground circuit.