P0607

P0607 ECM

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PERFORM DTC CONFIRMATION PROCEDURE

1.Turn ignition switch ON.
2.Check DTC.
Is DTC detected?
YES- Go to .
NO- INSPECTION END


Diagnosis Procedure


1. INSPECTION START

1.Turn ignition switch ON.
2.Erase DTC.
3.Perform DTC Confirmation Procedure.
See .
4.Check DTC.
Is the DTC P0607 displayed again?
YES- GO TO 2.
NO- INSPECTION END

2. REPLACE ECM

1.Replace ECM.
2.Go to Work Procedure.
- INSPECTION END