Inspection And Adjustment

REAR LOWER LINK

Inspection and Adjustment


ADJUSTMENT BEFORE REMOVAL

Adjust neutral position of 4WAS front actuator. (With 4WAS) Work Procedure (Pattern 1).

INSPECTION AFTER REMOVAL

Check rear lower link and bushing for any deformation, cracks, or damage. Replace it if necessary.

INSPECTION AFTER INSTALLATION

1.Check wheel alignment. Rear Suspension Alignment Inspection.
2.Adjust neutral position of steering angle sensor. (Without 4WAS) Work Procedure.
3.Adjust neutral position of 4WAS front actuator. (With 4WAS) Work Procedure (Pattern 2).