Work Procedure

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT

Work Procedure


1. PERFORM INITIALIZATION WITHOUT CONSULT-III

Perform initialization without CONSULT-III. Work Procedure.
- GO TO 2.

2. PERFORM INITIALIZATION FOR FRONT POWER WINDOW

Perform initialization for front power window. Special Repair Requirement.
- GO TO 3.

3. PERFORM INITIALIZATION WITH CONSULT-III

Perform initialization with CONSULT-III. Work Procedure.
- GO TO 4.

4. CHECK RETRACTABLE HARD TOP OPERATION

Check retractable hard top operation.
Is the inspection result normal ?
YES- WORK END
NO- GO TO 1.