Removal And Installation

SIDE OIL SEAL


Removal and Installation


REMOVAL
1. Remove final drive assembly. Removal And Installation.

NOTE:
It is necessary to remove final drive assembly to remove the rear drive shaft.
2. Remove side oil seal, using a suitable tool.

CAUTION:
Never damage gear carrier.

INSTALLATION
1. Apply multi-purpose grease to side oil seal lips.





2. Install side oil seal until it becomes flush with the case end, using the drift (A) [SST: KV40104710 ( -- )].

CAUTION:
- Never reuse oil seal.
- When installing, never incline oil seal.
3. Install final drive assembly. Removal And Installation.
4. When oil leaks while removing, check oil level after the installation. Inspection.