Inspection

REAR COIL SPRING AND SHOCK ABSORBER


Inspection and Adjustment


ADJUSTMENT BEFORE REMOVAL
Adjust neutral position of 4WAS front actuator. (With 4WAS) Work Procedure (Pattern 1).

INSPECTION AFTER DISASSEMBLY

Shock absorber
Check the following items and replace if necessary.
- Check shock absorber assembly for deformation, cracks, and other damage.
- Check piston rod for damage, uneven wear, and distortion.
- Check for oil leakage

Mounting insulator, rubber seat, bound bumper, and gasket
- Check mounting insulator, rubber seat, bound bumper, and gasket for cracks, uneven wear, and damage.
Replace if necessary.

Coil spring
- Check coil spring for cracks, uneven wear, and damage. Replace if necessary.

INSPECTION AFTER INSTALLATION
1. Check wheel alignment. Rear Suspension Wheel Alignment Inspection.
2. Adjust neutral position of steering angle sensor. (Without 4WAS) Work Procedure.
3. Adjust neutral position of 4WAS front actuator. (With 4WAS) Work Procedure (Pattern 2).